About the riser

About the riser

Aluminum titanate ceramics not only have a high melting point (1860°C) and a low thermal expansion coefficient (α≤2.0×10-6/K), but also have the property of not being wetted by many non-ferrous metal melts such as aluminum. Therefore, they are an excellent material...
Characteristics and functions of zirconia ceramic rods

Characteristics and functions of zirconia ceramic rods

Ceramic rods are made of zirconium oxide or alumina as production materials. Compared with similar products, the advantages are quite significant. It has good wear resistance. So what are the advantages of zirconia ceramic rods? Zirconia ceramic rods have the...
High density calcium silicate insulation board

High density calcium silicate insulation board

High-density calcium silicate insulation board is a calcium silicate board with a density of 800-1000KGS/M3 specially developed for the non-ferrous metal industry. It can be used for the transportation, shipping and shaping of molten aluminum and other non-ferrous...
About calcium silicate ceramic plates

About calcium silicate ceramic plates

With the improvement of people’s quality of life and the strengthening of environmental awareness, more and more new materials have appeared on the market to replace traditional materials. The following content is an analysis of the advantages of new calcium...
Alumina ceramic substrate

Alumina ceramic substrate

Ceramic substrates are widely used in fields such as power electronics, electronic packaging, hybrid microelectronics and multi-chip modules due to their excellent thermal conductivity and air tightness. Alumina is currently the most widely used ceramic substrate...
What is ceramic injection molding technology?

What is ceramic injection molding technology?

Ceramic injection molding technology, referred to as CIM, is an important branch of powder injection molding (PIM) technology. It is also developed on the basis of relatively mature polymer injection molding technology. Because it can produce products with complex...
en_USEnglish
Powered by TranslatePress