Ceramic Substrate

Due to the characteristics of high circuit accuracy, high surface flatness, high insulation and high thermal conductivity, ceramic substrates occupy an important position in the field of semiconductor power device packaging.

Free Quotation

Material Properties

ltem	Unit	96% AI2O3
Purity	%	96
Density	g/cm³	3.7
Porosity	%	0
Firing Temp	℃	1700
Hardness	HV	1540
Flexural Strength	Kgf/cm²	3200
Compressive Strength	Kgf/cm²	26000
Fracture Toughness	MPa/m	3.6
Max Operating Temp	℃	1480
Coefficient	cm/cm/°C	8
Thermal Expansion	(RT to 700ᵒC)	8
Thermal Conductivity	W/m°K	24
Volume Resistivity	20°C	10¹²
	100°C	10¹³
	300°C	10¹²~10¹³
(ohm – cm)	1010	10¹¹
Dielectric Strength	Volts/mil	212



Applications

High Power Semiconductor Module
Semiconductor refrigerators, electronic heaters
Power control circuit, power mixing circuit
Smart Power Components
High frequency switching power supply, solid state relay
Automotive electronics
Aerospace and military electronic components
Solar panel assembly
Telecommunications private exchange, receiving system
Laser and other industrial electronic components

Z

Advantages

Strong mechanical stress, shape stable
High strength, high thermal conductivity, high insulation
Strong binding force, anti-corrosion
Good thermal cycle performance, cycle times up to 50,000 times, high reliability
Like the PCB board (or IMS substrate), it can etch the structure of various patterns
No pollution, no pollution.
Operating temperature range -55℃～850℃
The thermal expansion coefficient is close to that of silicon, which simplifies the production process of power modules

Applications

Automotive resistor patch

Printed Electronics Printed Circuits

Contact Us

Applications

Advantage of Alumina Ceramic Substrate

Alumina ceramic substrates offer unparalleled advantages in heat dissipation, insulation, and resistance to extreme environments.

MORE›

Strength Fracture Toughness of Different Industrial Ceramic

Explore the exceptional characteristics of Alumina, Zirconia, Silicon Carbide and other industrial ceramics

MORE›

FAQ

Can you provide samples for me to test? How much does it cost?

We strive to provide ceramic samples that closely meet your requirements to the best of our abilities.
The samples are completely free, but you need to pay the freight.
For samples with unique shapes that require custom molds, we are open to discussing the mold cost in order to accommodate your specific needs.

We don’t know which material of ceramic we need, what should we do?

No worries! Please provide us with more details about your requirements, such as the intended use, desired properties, and any specific characteristics you're looking for.

With these information, our team can guide you in selecting the most suitable ceramic material for your needs.

We are concerned about the quality of the product we ordered.

We understand your worries and we maintain stringent quality control standards as following:

Test Standard	Testing Dimension	Pass Rate	Standard Range
Appearance Inspection	Quantity and Severity of Defects	≥ 97.3%	Determined by AQL standard
Dimensional Inspection	Size Accuracy and Consistency	≥ 98.1%	Determined by ISO 9001 standard
Density Testing	Material Density	≥ 97%	Determined by ASTM C20 standard
Hardness Testing	Surface Hardness	≥ 98.2%	Determined by ISO 6508 standard
Flexural Strength Testing	Material Flexural Strength	≥ 97.9%	Determined by ASTM C1161 standard
Thermal Shock Stability Testing	Material Thermal Shock Stability	≥ 98.7%	Determined by ASTM C884 standard

*Qualification standards higher than ISO standards

In addition to production line inspections, we also accept inspections from third-party organizations several times a month

While the occurrence of defects is extremely rare, it is an unavoidable possibility. If any quality issues arise, we take full responsibility and will expedite the reproduction process at cost price.

Our commitment is to ensure that our products meet the highest quality standards and promptly address any concerns to ensure customer satisfaction.

What is the processing accuracy of ceramics?

Precision Requirement	Example	Unit
Surface Flatness	Ra ≤ 0.1 μm	μm
Dimensional Accuracy	Tolerance within tens of μm	μm
Aperture Precision	Diameter tolerance within a few hundred μm	μm
Surface Finish	Ra ≤ 0.2 μm	μm

We maintain strict processing precision standards, ensuring that our products meet the majority of requirements using our standard manufacturing processes.

However, if you have a need for even higher precision products, please feel free to contact us.

We can discuss your specific requirements and explore customized solutions to meet your exacting standards.

What's your trade terms?

We prefer EXW, FOB and CIF as for terms.
T/T, West Union,30% deposit, 70% balance paid before delivery are greatly appreciated.

How long does your production take?

Q: What is the typical production lead time for Vhandy Ceramics?
A: The typical production lead time for Vhandy Ceramics is 15 to 20 days.

Q: Are there any situations where the actual delivery time may be longer?
A: Yes, in certain cases, such as shipping to distant countries, the actual delivery time may be extended beyond the standard range.

Q: What factors can contribute to longer delivery times?
A: Factors such as customs clearance procedures, transportation logistics, and international shipping arrangements can contribute to longer delivery times.

Q: How does Vhandy Ceramics handle potential delays?
A: Vhandy Ceramics strives to minimize potential delays and works closely with shipping partners to expedite the process whenever possible.

Q: Can I get an accurate delivery estimate for my order?
A: Yes, our customer service team can provide you with an estimated delivery time based on your specific order and location. They will also keep you informed throughout the production and shipping process.

Contact Us